| P-146 ANCHOR BOLT UPR | |||
| Resin Type: | DCPD/Vinyl Toluene Based | ||
| Pre-accelerated | |||
| Non-thixotropic | |||
| Resin Description: | High flash point | ||
| Medium-fast gel time | |||
| Application: | Anchor Bolts | ||
| Liquid Resin Properties* | Units | Typical Value | |
| NV | % | 62 | |
| Viscosity | cp 25 oC | 225 | |
| Curing System | 5% BPO (50%) Paste Equiv. |
||
| Gel Time | 100g/25 oC | 90 Seconds ** | |
| Cured Resin Properties* | Units | Typical Value | |
| Barcol | 934-1 | 42 *** | |
| HDT | oC | 82 *** | |
| Tensile Strength | MPa | 45 *** | |
| Flexural Strength | MPa | 102 *** | Elongation | % | 2.2 *** |
| * | These properties represent typical values obtained on samples prepared and tested according to accepted testing conditions. They are intended as guidelines only. | |||
| ** | Determined on differently promoted base resin. | |||
| *** | Determined on filled resin. Accelerator and peroxide levels are based on resin weight. | |||
| PLANT AND OFFICES: | DELTECH EUROPE, LTD |
|
PIPERELL WAY HAVERHILL SUFFOLK, ENGLAND CB9 8PH |
|
|
|
44 1440-716700 TELEPHONE 44 1440-708428 FAX |
| UPR SALES: | JOHN AIRD johna@deltech.uk.com |
| Since the foregoing is provided without charge and since use conditions and disposal are not within its control, Deltech Europe, Ltd. assumes no obligation or liability for such information and recommendations and does not guarantee results from the use of products described or other information contained herein. Deltech Europe, Ltd. makes no warranties, express or implied, including merchantability or fitness for purpose; nor is freedom from any patent owned by Deltech Europe, Ltd. or other to be inferred; and Deltech Europe, Ltd. disclaims all liability for any resulting loss or damage. |
|
|
|
|
|