TBS monomer produced by Deltech Corporation is a versatile substitute for styrene monomer with improved properties and fewer handling restrictions. From a performance standpoint, TBS has low volume shrinkage on polymerization, a high affinity for oils, high solvent receptivity and improved water resistance of copolymers. From an environmental standpoint, TBS has a low vapor pressure and high flash point which reduces emissions from storage or handling and reduces the flammability hazard. The low volatility of TBS reduces monomer fumes in the work place and TBS is not a listed air toxic so many environmental use requirements do not apply.          Molecular Weight:   160.26 Typical Isomer Distribution: 95% Para     5% Meta

In unsaturated polyester resin (UPR) applications such as SMC, BMC, lay-up, spray-up, casting and injection molding, TBS is an excellent diluent because of its low vapor pressure, high flash point, low shrinkage on polymerization and reduced exotherm. Higher operating temperatures are possible resulting in formulations with reduced viscosity, faster polymerization and cycle times, and the elimination of mold scum. TBS/UPR resins result in products with improved heat distortion and improved corrosion resistance. TBS monomer can be polymerized by any of the conventional ways of initiation and in the presence of inert materials such as fillers, dyes, solvents, resins, rubbers and plasticizers. Unlike polystyrene, the homopolymer of TBS is soluble in hydrocarbons due to its aliphatic nature. TBS can be copolymerized with other monomers while requiring minor recipe adjustments when replacing styrene monomer on a mole-for-mole substitution. TBS is the ideal monomer for use with alkyd and drying oil resins when greater aliphatic compatibility is desired. Also, the higher flash point of TBS permits higher operating temperatures resulting in shorter reaction times. In addition to improved aliphatic compatibility, TBS provides higher molar volume and improved thermal stability when used in manufacturing hydrocarbon resins. Typical precautions in handling TBS monomer include wearing protective clothing, the use of impermeable gloves and use in a well ventilated area. Do not store in direct sunlight. Maintain storage temperature below 75oF if extended storage is required. TBS monomer contains the polymerization inhibitor tertiary butylcatechol (TBC) to reduce polymer formation during storage. For other product safety and toxicological information, please consult the Material Safety Data Sheets for TBS monomer

Typical Monomer Values

Chemical Analysis Test Method TBS PMS VT Styrene             Purity, Weight % vinyl GC >95.0 99.7 99.2 99.7 Isomer Distribution GC             Para %   95.0 99.0 39.0 --      Meta %   5.0 1.0 60.0 --     Ortho %   -- -- 1.0 -- Polymer, ppm ASTM D-2121-84 Neg. Neg. Neg. Neg. Inhibitor, ppm TBC ASTM D-2120-82 40-50 25 12 12             Physical Properties                       Refractive Index, n25D   1.52 1.54 1.54 1.54 Density, g cm-3@ 25oC (77oF)   0.884 0.892 0.893 0.902 Surface Tension, dynes-cm-1 @ 25oC   29 34 31 32 Boiling Point, oC @ 760 mm HG   219 170 168 145 Freezing Point, oC   -38 -34 -77 -31 Volume Concentration on Polymerization               % calculated @ 25oC   7 12 12 17 Vapor Pressure, mm HG at                40oC (104oF)   1 4 4 14      80oC (176oF)   6 35 35 90    120oC (248oF)   37 170 176 368    160oC (320oF)   77 325 341 661 Heat of Polymerization, Kcal mole-1   16-18 15-17 15-17 17 Copolymerization Q & e values               Q   1.39 1.27 1.06 1.00     e   -0.90 -0.98 -0.78 -0.80 Heat of Vaporization, cal/g @25oC   -- 98.2 -- 102.4 Specific Heat, cal/goC @25oC   -- 0.413 -- 0.408

Solvent Compatibility:

Completely compatible with Acetone, Carbon Tetrachloride, Benzene, N-Heptane and Ethanol

PLANT AND OFFICES:	DELTECH CORPORATION
	11911 SCENIC HIGHWAY BATON ROUGE, LA 70807
	(225) 775-0150 TELEPHONE (225) 358-3149 FAX (800) 535-9945 CUSTOMER SERVICE

Nothing contained herein is to be construed as a recommendation to use any product in conflict with any patent. Deltech Corporation makes no warranties as to the fitness of merchantability of any product referred to, no guarantee of satisfactory results from reliance upon contained information or recommendation, and disclaims all liability for any resulting loss or damage.